By Foshan Metech Aluminum Technology CO.,LTD

04/25/2012 Aluminum Dross Processing Machine Aluminum Dross processor Aluminium Dross Recycling Machine Aluminium Dross Separating Machine Aluminum Dross Separator Aluminium dross processor is a machine adopts foreign advanced technology, no need for any fuel, fast recovery, which can made full use of the aluminum ash and scraps with high aluminum contents and replace the old way for recycling by labour. This machine can separate the aluminum and ash by one time, and has been very high efficiency for recycling rate(90% of aluminum from the ashes),short working time (10 minutes for finish the separation of aluminum and dross),low electricity consumption, environmental friendly(with dirt and smoke ventilation equipment) features. The whole machine is fully automatic in mechanical working way and its efficiency is increased 15% comparing with the manual way. Features of the Aluminum Dross Processing Machine: 1. No need for any fuel in the whole process 2. With dirt and smoke ventilation equipment. 3. Automatic mechanical operation, no harmful to the operator’s health. 4. High efficiency for recycling rate (90% aluminum from the dross),short working time (10-12 minutes can process 100kgs-500kgs aluminum and ashes)