Components of Asphalt Mixing Plant LBJ1500 1. Cold aggregate silos and feeders: group of 4 components The silo unit capacity: 8M³ (full hooper), total capacity 32M³; Continuous dosing belt (the feeder) and driving reduction motor, group of 4 units Two units’ electric vibrator 2. The aggregate collecting belt conveyor Dimension: 10×650 MM, length: 16M 3. The aggregate charging belt conveyor Dimension: 10×650 MM, Length: 8 M; capacity: 160T/H 4. Drying drum Dimension: Æ1950×7730 mm, The installation angel: 4.5°, The running speed 7.3rpm, Rotation running through 4 units electric motor and cycloid reducer, The outer side wrapped 50mm rock wool thermal insulation layer with stainless steel. 5. Burner group for the dryer (the oil burner), It is the Chinese full-automatic control oil burner with a diesel tank (10t) and a heavy oil tank (10t).(We can provide the imported oil burner, too) The automatic control oil burner can adjust the flame avoiding the over-heat dust burning the bag of the filter 6. The mixing tower with supporting legs, repairing platform and ladder 7. Hot aggregate elevator: adopts the double-chain elevating hooper, capacity: 140t/h 8. The new powder bin: 23 M³; the powder elevator adopts chain-type elevating hooper, capacity: 25 T/H 9. The recycling powder bin: 18 M³, with screw conveyor 10. The screen unit of the hot aggregate: 4 grades, capacity 140t/h 11. Hot aggregate storage bin: 4 numbers, the total capacity 30 M³ 12. The metering device for the hot aggregate, powder and bitumen 13. The mixer capacity: 1500 kg/batch 14. The bag filter (with filtering area of 510㎡) 15. The central controlling cabin (5.19M*2.25M*2.5M) with the advanced controlling system and controlling device (computer) 16. Bitumen tank (25t) three units with the pipeline, one unit bitumen unloading tank (10t) 17. The bitumen pump (capacity 25 T/H) 18. The heat conduction oil heating system: the thermal oil heater capacity 600.000 Kcal / h